Request for blueprints and production of front axle yokes for a Bentley 50 chassis.
| Identifier | ExFiles\Box 111\4\ scan0104 | |
| Date | 22th April 1939 | |
| 802 and 850 HPS. {Horace Percy Smith - Experimental Factory Mgr} c. Rm. {William Robotham - Chief Engineer} c. Rm {William Robotham - Chief Engineer} /FJH. {Fred J. Hardy - Chief Dev. Engineer} By {R.W. Bailey - Chief Engineer} /Ald. {F. Allwood - Experimental Design} 1/AW.22.4.39. BENTLEY 50 CHASSIS. FRONT AXLE - SECTION 7040. Please receive herewith 2 blue prints of the following:- EXS.1610. Front axle yoke. - RH. {R. Hollingworth} - - - 1 off. EXS.1611, Front axle yoke. - LH. {Mr Haworth} - - - 1 off. The above are as requested by memo Rm {William Robotham - Chief Engineer} /FJH. {Fred J. Hardy - Chief Dev. Engineer} 1/MH. {M. Huckerby} 21.4.39, to provide a castor angle of 3 o {Mr Oldham} /4 . Kindly produce 1 set. ael By {R.W. Bailey - Chief Engineer} /Ald. {F. Allwood - Experimental Design} | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).