From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Blueprints for a Ball End Pin and Washer for a Bentley 111 chassis to correct geometry errors.
| Identifier | ExFiles\Box 100\2\ scan0038 | |
| Date | 8th March 1938 | |
| HDS. c. Rm.{William Robotham - Chief Engineer} C. Rm{William Robotham - Chief Engineer}/FJH.{Fred J. Hardy - Chief Dev. Engineer}1 BY/Ald.{F. Allwood - Experimental Design}15/G.8.3.38. 200b 450 BENTLEY 111. CHASSIS. CROSS STEERING - SECTION 7041. Please receive herewith two blueprints of each of the following :- Ex.S.563 Ball End Pin - 2 off. Ex.S.564 Washer for Ball Pin - 2 off. These have been detailed at the request of memo Rm{William Robotham - Chief Engineer}/FJH.{Fred J. Hardy - Chief Dev. Engineer}1/MH.{M. Huckerby}8.3.38. to enable the cross steering tube to be lowered .500 at the centre ball joint, to over- come geometry errors in the front suspension. These pieces are required urgently for fitting to the B.111 car. Kindly instruct one set. Ald{F. Allwood - Experimental Design} BY/Ald.{F. Allwood - Experimental Design} | ||