From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
List of required designs for chassis, transmission, brakes, and coachwork components.
| Identifier | ExFiles\Box 109\3\ scan0039 | |
| Date | 5th December 1940 | |
| Ev{Ivan Evernden - coachwork}/JD.{J. Draper - Frames}2/ET.5.12.40 - 2 - CHASSIS TRANSMISSION & BRAKES. 10. Clutch Actuation. 11. Side Speed Lever. 12. Standard Cheaper Speedo Drive. 13. Hand Brake in Scuttle. 14. Hand Brake Linkages. 15. Propeller Shaft. 16. Hydraulic Master Cylinder. 17. Frame Front Gusset. 18. Frame Stiffener Gussets. 19. Rear Engine Mounting. 20. Front and Rear Bumpers. 21. Pedals. 22. Accelerator Pedal. 23. Dashboard Mounting. 24. Dashboard Insulation. 25. Dashboard Wiring. 26. Chassis Lubrication Pipe Layout with Tecalemit Pump. 27. Horn Switch. 28. Steering Column Wheel and Head. 29. Lucas Automatic Switch on Dashboard. 30. Ignition Coil on Dashboard. 31. Petrol Filler Tube. COACHWORK SECTION. The following designs are required from the Coachwork Section:- 1. 1/16" Scale of Body. 2. Bonnet. 3. Radiator Shell. 4. Wingstays. 5. Dashboard Contour and Shape. 6. Floor Boards. 7. Instrument Board. 8. Provision for concealed filler cap in rear wing. Ev{Ivan Evernden - coachwork}/JD.{J. Draper - Frames} | ||