Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Modifications to car bonnets to prevent denting and improve support.

Identifier  ExFiles\Box 102\6\  scan0148
Date  22th November 1932
  
COPY. x5260.

To By.{R.W. Bailey - Chief Engineer} From Sg.{Arthur F. Sidgreaves - MD} Re. Bonnets. Sg.{Arthur F. Sidgreaves - MD}4/E22.11.32.
c. to Wor.{Arthur Wormald - General Works Manager} Hs{Lord Ernest Hives - Chair}/Lid.{A. J. Lidsey}
PN.{Mr Northey} Cx.{Major Len W. Cox - Advertising Manager} Mx.{John H Maddocks - Chief Proving Officer} Hd.{Mr Hayward/Mr Huddy}

x5260.

Referring to Hs{Lord Ernest Hives - Chair}/Lid.{A. J. Lidsey}4/MA.18.11.32 and the last few paragraphs we have looked at the bonnet on 19-EX. and we agree that we should be better off without the contact pieces which have the disadvantage of concentrating the whole weight on them and thereby denting the tops of the panels.

As one assumes it is merely a case of leaving some-thing off I presume this could be introduced fairly quickly.

We should like you to lengthen the support that holds the side of the bonnet away from the scuttle when the bonnet is open as it is too short on 19-EX. and has allowed the scuttle to be marked. -We find it is quite O.K. on the 20/25 but not on the 40/50.

Sg.{Arthur F. Sidgreaves - MD}
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙