From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Parts list and specifications for a 33 GVll Silver Dawn 80 special chassis frame.
| Identifier | ExFiles\Box 119\4\ scan0188 | |
| Date | 26th May 1939 | |
| 1025 BY/HEB.{H. Biraben}2/WB.{Mr Brazier/Mr Bell}26.5.39. 33 GVll SILVER DAWN 80 (Hs{Lord Ernest Hives - Chair} SPECIAL) 10-10" WHEELBASE CHASSIS WITH BENT PAN. FRAME .092 THICK. Will ROY{Sir Henry Royce}/Les.{Ivan A. Leslie} please order frame for above chassis as follows. Frame complete to LOP.FB.4047 Frame Makers Assembly with the exception of the following parts which are to be .092 thick :- FB 4996 Frame Side Member, R.H. 1 off replg FB 4520. FB 4997 " " " L.H. 1 " " FB 4521 FB 4998 Frame Stiffener, Rear End, R.H. 1 " " FB 4320 FB 4999 " " " " L.H. 1 " " FB 4321 FB 5000 2nd Crossmember. 1 " " FB 3905 FB 5011 Cruciform R.H. Channel. 1 off " FB 4342 FB 5012 " L.H. " 1 " " FB 4343 FB 5009 Gusset to Front C'member, R.H. 1 " " FW 1935 FB 5010 " " " " L.H. 1 " " FW 1936 FB 5001 Front Gusset R.H. Cruciform to Side Member, R.H. 1 off replg. FB.4287. FB 5002 " " L.H. " L.H. 1 off replg. FB.3241. FB 5013 Rear Gusset Stay, R.H. 1 off replg. FB.4239 FB 5014 " " " L.H. 1 " " FB.4240 Will the Expl. Dept. please note the following are the parts required for the bent front pan .104 thick :- FW 1824 Front X'Member Bottom Plate, R.H. 1 off FW 1825 " " " " L.H. 1 " FW 1827 Front Pan, Top Half. 1 " FW 1808 Stiffener Front X'Member Top Piece, R.H. 1 " FW 1809 " " " " " L.H. 1 " FW 1826 Front X'Member Bottom Plate, Centre. 1 " Prints for above new parts have been forwarded under cover of memos BY/HEB.{H. Biraben}1/WB.{Mr Brazier/Mr Bell}24.5.39 and BY/HEB.{H. Biraben}1/WB.{Mr Brazier/Mr Bell}25.5.39. contd.... | ||