Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Standardisation sheet for a fully floating bevel, detailing costs and production for extra tooling on the 'T' series chassis.

Identifier  ExFiles\Box 171\2\  img161
Date  18th May 1934
  
STANDARDISATION OF PARTS
FULLY FLOATING BEVEL
To obtain maximum stiffness. No splays in the hub lathes.
Est. cost of extra jigs, tools and equipment (Sft{Mr Swift}/Ws.18.5.34) - £36.0.0.
Could be brought on to production at 1st chassis in 'T' series, (Sft{Mr Swift}/GH.18.5.34).
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙