From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Comparing Goshawk engine valve timings with different camshafts.
| Identifier | WestWitteringFiles\K\July1923\ Scan64 | |
| Date | 1st July 1923 | |
| E.{Mr Elliott - Chief Engineer} from Hs.{Lord Ernest Hives - Chair} ORIGINAL Hsl/LG16.7.23. V4229 V4238 V3310 V4226 V3942 GOSHAWK TIMING. The results given on the Charts were all taken on Goshawk 1. engine with Goshawk 1. Cams. The average Goshawk 11 timing was with the nearest approximate which can be obtained with Goshawk 1. Cams. The average Goshawk 11 engines is as follows :- Average Goshawk 11. G.1 Cams. G.11 timing. Best. I.O 12º I.O 12º I.O 5º B.D.P. I.C 53º I.C 49º I.C 32º E.O 49º E.O 39º E.O 42º E.C 5º E.C 5º E.C D.P. You will see this closely follows the drawing figures. We ought to have made it more clear that the average Goshawk 11. timing was the best average which could be obtained with Goshawk 1. Cams. With Goshawk 11 timing and cams, we should expect slightly worse results than with the best average Goshawk 11 timing obtained with Goshawk 1. cams. With regard to the new Camshaft. We imagined that we were having a longer exhaust valve cam with less angle between the valves; the inlet valve remaining the same length as at present except that it would open earlier and close earlier and that there would be a slight overlap between I.C. and E.O. I.O 5º B.D.P. I.C 36º E.O 45º E.C 10º HS{Lord Ernest Hives - Chair} | ||