List of non-standard parts to be removed from chassis B.35.AE and replaced with standard pieces.
| Identifier | ExFiles\Box 90a\6\ Scan234 | |
| Date | 22th April 1939 guessed | |
| To HD. {Mr Hayward / Mr Huddy} Chassis No B.35.AE. E.R. HALL. List of excptl. parts to be removed & replaced by standard pieces as necessary. Chassis:- ① All Hartford dampers & fittings. ② 48 gallon petrol tank & fittings. ③ Extra oil tank & fittings from dash. ④ Spare petrol pump, pipes, tap & wiring. ⑤ Extra wiring to lamps & ignition. ⑥ Accelerator pedal. Engine:- ① Cylinder head, rockers, shaft, rods & gasket. ② Bottom half crankcase complete with floatchamber, feed pipe & pump. ③ Clutch complete. ④ Ignition tower to be made standard by Rm {William Robotham - Chief Engineer} /Childs ⑤ Water pump & drain cocks. Rear Axle:- Casing stamped 11x41 but believe gears to be 10x41 and ratio found to be so by examination. Inspect before release. Rm {William Robotham - Chief Engineer} /Hhp. | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).