From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Reassembled Rippletto chassis from supplier John Thompsons, detailing required parts.
| Identifier | ExFiles\Box 118\1\ scan0289 | |
| Date | 17th May 1940 | |
| To.Rm.{William Robotham - Chief Engineer} c.c to Bv. [struck through] c.c to Les.{Ivan A. Leslie} [struck through] Rm{William Robotham - Chief Engineer}/HH 3/17.5.40. RIPPLETTO CHASSIS. RE ASSEMBLED FRAME AS SUPPLIED BY JOHN THOMPSONS. With reference to the above, Les has discussed with us difficulties which confront him in getting John Thompsons to supply this frame. He is of the opinion that Thompsons will have to be coaxed to even assemble the frame, and does not consider that they will produce any new parts additional to those that have already been made for this frame. Les suggests that we should produce all parts not already made, with the exception of the standard BV pieces, which Thompsons will already have. We have mentioned this matter to Rm{William Robotham - Chief Engineer}/RH{R. Hollingworth}, who has raised the question of how he can obtain quickly the necessary material to enable him to make these parts. This query we have put back to Les, who assures us that he will have no difficulty in getting this material (16SWG-.064 sheet) for us. We give below a list of parts which we shall have to make:- RF. 753. Frame Stiffener-Rear-RH{R. Hollingworth}-1 off RF. 754. " " -LH{Mr Haworth}-1 off RF. 755. 2nd Crossmember-1 off. RF. 722. Bracket- Engine Mounting-RH{R. Hollingworth}-1 off RF. 723. " - " -LH{Mr Haworth}-1 off RF. 989. Stiffener- Engine Mounting Bracket-2 off. RF. 983. Stiffener- 4 off. RF. 984. " - 2 off. RF. 985. " - 2 off. RF. 987. " - 2 off. RF. 1007. " - 2 off. RF. 1004.Rear Crossmember- 1 off. RF. 1005.Support Bracket-RH{R. Hollingworth}-1 off. RF. 1006. " " -LH{Mr Haworth}-1 off. RF. 988. Stiffener- 2 off. RF. 738. Support Bracket-RH{R. Hollingworth}-1 off. RF. 739. " " -LH{Mr Haworth}-1 off. RF. 740. " " -LH{Mr Haworth}-1 off. RF. 741. " " -LH{Mr Haworth}-1 off. RF. 1119.Frame Stiffeners-Rear Engine Mounting- 1 off RF. 1120. " " " " " - 1 off [Handwritten note: These drwgs are in the course of issue.] The following parts which are required, can be made by John Thompsons from standard BV parts in their possession:- RF. 981. Body Bracket-RH{R. Hollingworth}-1 off- produce from FB.4461. RF. 982. " " -LH{Mr Haworth}-1 off- " " FB.4462. RF. 980. " " -RH{R. Hollingworth}-2 off- " " FB.4463. RF. 986. " " - 2 off- " " FB.3502. FB. 5028. Battery Support-1 off- " " FB.4281. RF. 867. Stiffening Plate-1 Off-same as FB3634 except length. RF. 868. " " -1 Off- " " FB.3635 " " (continued) | ||