Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Blanking plate for use on the Wraith III dashboard when a car heater is not fitted.

Identifier  ExFiles\Box 137\3\  scan0131
Date  25th August 1939
  
BY/NS.{Norman Scott}
c. Rm.{William Robotham - Chief Engineer}
c. De/JD.{J. Draper - Frames}
11-8
DA.{Bernard Day - Chassis Design}8/G.25.8.39.

RR. CAR HEATERS ON DASHBOARD. WRAITH III.

Please receive herewith :-

F.CD.1510 Blanking Plate for use when heater is not fitted.

As it is intended to drill all dashboards so that a car heater can be fitted, when required, with a minimum amount of work, this scheme shows a method of blanking off or covering the holes when the heater is not fitted. It consists of a mild steel plate located by the two hank rivet bushes and secured by a centre bolt.

2 BA. screws should be inserted in the heater fixing holes.

This is required for production chassis.

DA.{Bernard Day - Chassis Design}
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙