From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Parts list with corresponding part numbers, descriptions, and quantities.
| Identifier | ExFiles\Box 87\5\ scan0126 | |
| Date | 29th August 1933 | |
| -2- BY/HEB{H. Biraben}2/M.29.8.33.-Contd- SPEC:70 50-Contd- STUFOR EXISTING PARTS ALSO REQD:-Contd- FB. 51 Control Lever Knob Screw. 2 off. FB. 82 " " (Mixture and Dipping). 2 " FB. 83 Horn Switch Knob. 1 " FB. 85 " " Spring. 1 " FB.532/4 Adjusting Washer(Contact Points). to suit. E.30098 Stud(Support Bracket on Dash). 2 " E.53027 Washer for Dashbracket. 4 " F.{Mr Friese} 8510 Taper Pin(Contact Point Nut). 1 " D100320 Screw for Control Quadrant. 4 " F.58670 Control Lever Spring Pin. 2 " F.58671 " " " " Cup. 4 " F.58673 " " " Tooth. 3 " F.83987 Contact Point. 8 " FB. 551 Lock Plate Screw. 2 " E.15003 Screw for Control Knob. 2 " FB. 616 Mixture Lever Spring. 1 " FB. 617 " " " Locating Pin. 2 " K.{Mr Kilner} 310 Bolt(Dashbracket). 4 " K.{Mr Kilner} 4313 Nut ( " ). 4 " K.4307D Nut (Steering Column Bracket). 4 " K.9009 Spring Washer(Dashbracket). 2 " K.9060 " "(Steering Column Bracket). 2 " F.20351 Spring Ring(Universal Joint Cover). 1 " F.20352 Rubber Packing Ring(Universal Joint Cover). 1 " F.20353 Retaining Piece(Rubber Ring). 1 " F.23662 Double Thrust Race. 2 " F.23663 Outer Ball Race. 1 " F.23664 Nut for Double Thrust Race. 1 " F.23665 Lock Ring(Retaining Nut). 1 " F.23666 " "(Thrust Race Nut). 1 " F.23669 Retaining Nut(Lock Ring). 1 " F.27609 C'sk:Head Screw(Knurled Ring). 3 " F.27621 Lock Nut(Ball Race Cover). 1 " F.57623 Washer for Ball Race. 1 " F.57625 Knurled Ring(Ball Race Cover). 1 " F.57629 Ball Race Cover. 1 " F.27631 Universal Joint Cover. 1 " F.70607 Screwed Plug for Holders. 15 " F.71842 Locking Tab(Stationary Tube Guide). 1 " F.73896 Packing for Dashbracket. 1 " F100771 Bottom Support Bracket. 1 " F100772 Guide(Stationary Tube). 2 " F100791 Stud(Bottom Support Bracket). 2 " F100792 " ( " " ). 4 " F.55710 Feed Pipe Clip. 1 " E.{Mr Elliott - Chief Engineer} 5127 Taper Peg(Bottom Support Bracket). 4 " E.{Mr Elliott - Chief Engineer} 5127 " "(Steering Worm Tube). 2 " E.13777 Locknut(Bottom Bracket Stud). 4 " E.22713 Nut for Taper Piece. 2 " E.53027 Plain Washer(Dashbracket). 4 " E.54181 Washer(Rocking Shaft). 1 " -Contd- | ||