Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Outlining required modifications to accommodate a B.U.S.M. type magazine and gun mounting.

Identifier  ExFiles\Box 176\1\  img127
Date  7th December 1940 guessed
  
- 2 -

we would point out that the keel increases in width from 21" at former 69 to 23" at former 61 1/2 and that the projection on the gun body at this point appears to foul.

The floor bearers at the point "H" on your drawing could be modified and strengthened if necessary to carry the gun rear mounting.

B.U.S.M. type magazine.

It would appear that an entirely new floor construction would be necessary to accomodate this type of magazine, unless it were possible to lower the whole gun. In this case, the removable doors can be made any shape necessary to cover the guns if they should protrude through the present outline.

Yours sincerely,

(Signed...) L.G.Frise.
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙