Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Cessation of experimental work on vibrator regulators for the 40/50 Chassis and Goshawk dynamos.

Identifier  ExFiles\Box 31\1\  Scan105
Date  16th February 1921
  
X.1402

To R.{Sir Henry Royce} from EFC.
c. WJ
c. Da.{Bernard Day - Chassis Design}

EFC2/T16.2.21.

X.3526. R.R.40/50 Chassis Dynamo made from Starter Motor Parts. X.294
X.3533. Goshawk Dynamo. X.1402

We have your note R10/G9.2.21. instructing us to abandon for the present experimental work on vibrator regulators.

The R.R. dynamo for the 40/50 made from starter motor parts has been completely instructed in the Experimental Shop and the Goshawk dynamo is in process of being detailed. Both these dynamos are plain shunt wound machines for vibrator regulator control.

I assume from your note that you wish us to stop this work and revise the design of these dynamos to make them suitable for single field winding third brush control. I will therefore give instructions to this effect if I do not hear from you to the contrary.

We do not consider that the dynamo will do all we desire. We think that the characteristics of vibrator control are so good if properly arranged and would so prolong the life of a battery, that a reliable system of this kind is worth striving for.

We are asking the O.O. to obtain the latest catalogues etc from Messrs. Lucas and C.A.V., but I do not think they will have any dynamos to offer us with the control arranged with the third brush and single field winding.

EFC.
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙