From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Letter from the Chassis Design Department discussing specifications for a water excluder.
| Identifier | ExFiles\Box 121\1\ scan0391 | |
| Date | 19th December 1940 guessed | |
| -2- required on the water excluder to carry it back round the drum. In other words, I am afraid we must ask you to allow for the extra .048" of the water excluder between the two halves of the bisector unit, unless the features of the plate you now have sandwiched there can be reproduced on our water excluder. Our water excluder is, of course, on the other side of the carrier plate compared with your plate. Perhaps you will let me know your comments on this. Yours faithfully, for ROLLS-ROYCE LIMITED, Chassis Design Department. | ||