Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Requesting the production of a new set of steel high lift rockers for a P.II, as the phosphor bronze set failed.

Identifier  ExFiles\Box 17\6\  Scan126
Date  28th July 1933
  
x7060.

To RHC.{R. H. Coverley - Production Engineer} from Hs{Lord Ernest Hives - Chair}/Rm.{William Robotham - Chief Engineer}

Hs{Lord Ernest Hives - Chair}/Rm.{William Robotham - Chief Engineer}2/KT.28.7.33.

HIGH LIFT ROCKERS - P.II.

You will recollect that some time ago you made two sets of high lift rockers, one set on phosphor bronze and one set in steel. The steel set was fitted to Mr. Fairey's car. We now find that the phosphor bronze will not stand up to the speeds which we are at present running. Will you therefore please produce a set of these rockers in steel. We hand you one herewith as a model.

Hs{Lord Ernest Hives - Chair}/Rm.{William Robotham - Chief Engineer}
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙