Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Letter to The Birmingham Aluminium Casting Co. Ltd. regarding Piston Drawing No. E60632.

Identifier  ExFiles\Box 148\3\  scan0199
Date  3rd February 1937
  
(Experimental Dept.)
120b
Rm{William Robotham - Chief Engineer}/Mths.{Reg Matthews}17/M.{Mr Moon / Mr Moore}
3rd February, 1937.

The Birmingham Aluminium Casting Co.Ltd.,
Birmid Works,
Smethwick,
BIRMINGHAM.

Dear Sirs,

For the attention of Mr. A.P. Fenn.

Many thanks for your letter of the 1st instant and we have much pleasure in sending you a print of our Piston Drawing No. E60632. This drawing shows all the main dimensions with the exception of the skirt and ring land diameters. We have not enclosed the drawing showing the finished skirt dimensions since these will not apply to your Piston, but if there is any further information you require, we shall be pleased to forward it at your request. We should mention that our nominal bore diameter is 3.5005.

We should also like the approximate price of your Piston supplied complete with rings and Gudgeon Pin in quantities of 1200.

Yours faithfully,

For ROLLS-ROYCE LTD.
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙