From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Proposed arrangement for a squeak damper on the front brakes of a 10,000-mile 20HP car.
| Identifier | WestWitteringFiles\Q\January1927-March1927\ 98 | |
| Date | 22th February 1927 | |
| TO DF.) FROM DA.{Bernard Day - Chassis Design} HS.{Lord Ernest Hives - Chair}) Copy to BJ. ORIGINAL RECEIVED DA{Bernard Day - Chassis Design}1/M22.2.27. X4612 X5425 X.5420 10,000 MILE 20HP. CAR. SQUEAK DAMPER ON FRONT BRAKES. Herewith we send N. sch. 2369. shewing the proposed arrangement of squeak damper on the 20HP. front brakes which we understand is urgently required for the 10,000 mile car about to be finished. Accordingly we are sending the scheme directly to you, and putting it through the other routine in parallel. We believe that there is clearance between the end of the cross steering tube and the squeak damper but if it is not sufficient the remedy will be to set down the cross steering lever a small amount. We have no particulars of the present dust shield except those on the original experimental report, and the clearance between this and the cross steering tube end has not been altered. We shew two alternative methods of construction of the shoe and the locating groove, and think we prefer the alternative in the L.H. top corner ourselves. Would Derby please choose the one they can make most easily. DA.{Bernard Day - Chassis Design} | ||