Design status report for various components of the Phantom III chassis.
| Identifier | ExFiles\Box 30\4\ Scan059 | |
| Date | 10th December 1935 | |
| (sheet 3) ITEM. DESIGN POSITION. PHANTOM 3 CHASSIS. Hydraulic jacking system. In hand. Spherical bearings for front roll rod. Put aside. Mod. to support plate for brake damper cylinder. " " Proposed oiling scheme using Autoklean filter. In hand. Gauze filter for hydraulic tappets. Completed 2.12.35. Air silencer for Duplex carburetter system. In hand. Isolated change gear lever. Completed 4.12.35. Horizontal hand brake lever with increased travel. Put aside. Top water rails - four port cylinder head. In hand. Top water pipes to radiator - four port cylinder head. In hand. I.F.W.S. machined face for main housing on front crossmember. Put aside. Outside petrol tank filler. Completed 10.12.35. Taps on engine for Clayton interior heater. In hand. Mod. to road wheel locking device to facilitate entry of splines. In hand. Larger engine oil filler. Completed 30.11.35. Gearbox:- Constant mesh wheel and third speed pinion on layshaft in one unit. Put aside. Non chatter oil relief valves. Put aside. | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).