Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Request to machine two flywheels as per an attached sketch to fit a 12-EX car for crankshaft testing.

Identifier  ExFiles\Box 13\7\  07-page013
Date  8th May 1928
  
To RHC.{R. H. Coverley - Production Engineer} from Hs{Lord Ernest Hives - Chair}/Rn.{Mr Robinson}

+7300

+7010

Hs{Lord Ernest Hives - Chair}/Rm{William Robotham - Chief Engineer}2/LGl.8.5.28.

We want to try 12-EX crankshaft without the slipper wheel.Owing to the construction of the new type slipper drive we cannot do this without machining alteration.

We have two odd flywheels that are not required now that the spring plate type of drive has been adopted. Will you please machine them to the attached sketch and fit them on 12-EX car.

Hs{Lord Ernest Hives - Chair}/Rn.{Mr Robinson}
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙