From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Specification sheet outlining the minimum performance and physical constraints for a dynamo.
| Identifier | ExFiles\Box 51\1\ Scan352 | |
| Date | 8th March 1924 guessed | |
| -2- Contd. which remains up at a high ampere value. (N.B. 2000 r.p.m. of dynamo corresponds, assuming the more normal 11/50 axle ratio, approximately to 27.5 m.p.h. road speed) Up to this point (2000 r.p.m.) the ampere output speed curve should lie completely above that given by the following figures, the dynamo operating terminal voltage being adjusted to be within ± .1 of the figure indicated by this table for each value of the ampere output. Minimum Specified Performance in fully hot condition. Speed. Operating Voltage (Limit ± .1) Ampere Output Corresponding approx. miles per hour. 640 13.6 0 8.8 750 13.9 2.5 10.3 900 14.3 5.5 12.4 1200 14.75 9.0 16.5 1500 14.85 10.0 20.6. 2000 14.75 9.0 27.5 (4) It is expected that the weight of the dynamo inclusive of pulley, but exclusive of suspension, will not exceed 25 lbs. and that the dynamo be perfectly electro-magnetically silent at all speeds and outputs, and that the carcase diameter will not exceed 5". RFC. | ||