From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Letter to Park Ward Ltd. enclosing prints and providing instructions regarding a gear lever cutout and tunnel over the gearbox.
| Identifier | ExFiles\Box 109\2\ scan0218 | |
| Date | 21th April 1941 | |
| 704 Rm{William Robotham - Chief Engineer}/EAG.1/ET. 21st April, 1941. Messrs. Park Ward Ltd., 473 High Road - Willesden, L O N D O N N.W. 10. Dear Sirs, Herewith two copies each of the following prints:- RB.{R. Bowen}10008 - Sheet 1 RB.{R. Bowen}10008 - " 2 RB.{R. Bowen}11125/6 RB.{R. Bowen}11127/8 RB.{R. Bowen}15116 RB.{R. Bowen}15117 Final details of the tunnel over gearbox on RB.{R. Bowen}10008 will follow later. Please note that where numbers of part names in preliminary specification differ from those shown on drawings, the latter may be regarded as correct, as changes become necessary while the design advances. RB.{R. Bowen}10122 - Reinforced Gear Lever Cutout, may be welded in, but the cutout in floor panel should be left until the later gearbox with side change is fitted. Yours faithfully, | ||