Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Technical report on a 6-cylinder Delage chassis obtained on loan for inspection.

Identifier  ExFiles\Box 21\4\  Scan070
Date  23th July 1920
  
X 3500

To R+ from Hs.{Lord Ernest Hives - Chair}
c. to CJ.
c. to Bn.{W.O. Bentley / Mr Barrington}
c. to E.{Mr Elliott - Chief Engineer}
c. to Da.{Bernard Day - Chassis Design}
c. to By.{R.W. Bailey - Chief Engineer}

Hs{Lord Ernest Hives - Chair}2/LG23.7.20.

X.3500. RE DELAGE . CAR.

Mr. Cowan has been able to obtain on loan a 6-cylinder Delage chassis. We have had this at the works for two days. The chassis is the latest type fitted with brakes on all four wheels operated by foot pedals - the countershafts brake operated by hand lever.

The following are particulars we were able to obtain of this car:-

ENGINE.

It is a 6-cylinder engine - 80 mm bore - 150 mm stoke. The induction passages are cast integral in the cylinder block. Two Zenith Carburetters are fitted. It has "D" headed cylinders without detachable heads. The exhaust Manifolds are bolted to the cylinder block.

Compression by gauge is 73 lbs.
Compression ratio is 4 to 1.
Capacity in the combustion chamber 15 cu. ins.
Swept volumn of cylinders - 46.2 cu. ins.

On the exhaust side of the engine is fitted the starter Motor and Dynamo. The dynamo is driven off the front engine gears. The Starter operates on to the flywheel. The magneto is fitted in the front of the engine, - the drive being

Contd.
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙