From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Parts list document detailing components with quantities, part numbers, and weights.
| Identifier | ExFiles\Box 132\2\ scan0098 | |
| Date | 14th March 1940 | |
| R.R. 1011/1 (2.5) (17267 14-3-40) B.P. 49936 Section Ref. No. No. Off. Part No. Weight lbs. ozs. Distance washer, throttle shaft centre. 1 2 SU.01672 ) 43 12 Stop - throttle lever stop 1 SU.01676 ) Nut throttle lever bolt 2.B.A 1 SU.01682 ) Nut, bolt throttle disc. 2.B.A 2 SU.01685 ) Gland washer throttle disc 4 SU.01497 ) Bracket - pivot float 1 SU.01245 ) Pivot pin - float brkt. 1 SU.01377 ) Set screw 2 SU.0964 ) Tab washer set screw float brkt. 2 SU.01914 ) Needle seating, float chamber needle 1 SU.02268/1) Nut. Gland. Water jacket 2 E.33045/2) Locking ring - gland nut 2 E.33046 ) Gland - water jacket 2 E.33059 ) Joint ring - gland - water jacket 2 E.48257 ) Clip - pipes - rear rotor brgs. 4 D.2447 ) Bush - clips 2 D.2448 ) Nut - 5.B.A. lock 4 K.4301 ) Plain washer 5.B.A. 4 K.4401 ) Casing supercharger font half 1 D.11576 ) Plug-cone holes 2 D.7827 ) " " " front casing 3 E.32202 ) " " " " " 3 D.7828 ) Stud diffuser vane ring 2 D.6663 ) " " " " 1 D.6664 ) " " " " 1 D.6665 ) " " " " 1 D.6666 ) " " " " 1 D.6667 ) " " " " 1 D.6668 ) " " " " 1 D.6669 ) " " " " 1 B.D.6670 ) " " " " 1 D.6671 ) Stud s/charger joint face 1 D.6676 ) Stud induction elbow S/C flange rear case 1 G.52080 ) Stud - boost reg. casing 2 2 E.36262 ) 23 0 Stud - S/C joint face 1 D.6674 ) " " " " 1 D.7668 ) " " " " 1 D.7669 ) " " " " 2 D.4772 ) Stud - s/charger to W/Case 18 D.7693 ) " " " " " 1 D.7694 ) " " " " " 1 D.7695 ) Stud - diff.bolt lock plate 1 D.8242 ) Nut " " " 3 D.8436 ) Distance piece " " 3 K.4307 ) Adaptor drain pipe conn. 3 D.6697 ) Housing - thrust brg. rotor shaft 1 E.40624 ) 1 E.32703 ) | ||