Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Standardisation document for a clip for flat type magneto wiring on a chassis.

Identifier  ExFiles\Box 172\1\  img219
Date  18th December 1919
  
ORIGINAL
STANDARDISATION OF CHASSIS PARTS. 22/8 S.W.G. (.028")

Description of Part: CLIP FOR FLAT TYPE MAGNETO WIRING. SIMILAR TO PHANTOM.
Origin: Experl Test Report.
Reason for Change: TO OVERCOME CHAFING DETERMINED UPON.

Shop or Test Report

Fitted to 21-DIV: fitted to 100,000 m/m frames only
Fitted to 21-DIV: for tests on Phantom frames

The number of the first chassis on which the new part will be fitted.... 101 in 'T'.
Date when chassis will be handed to test... ---
Cost of scrapped material, if any.... Nil.
Cost of jigs and tools..... Tool Cost incl. in figs. on Diamond Mounting Sheet.

Change by No. E 1-16-19
Iucted 9886
D.S.O.W. 11.12.19

REMARKS | DATE | INITIAL
Agreed to | 29.11.19 | SC
Trial | 1.12.19 | R
| 2.12.19 | WOR{Arthur Wormald - General Works Manager}
D passed | 3.12.19 | C
S passed | 9.12.19 | DR
All passed | 10.12.19 | AQ
C passed | 9.12.19 | YB
No passed | 12.12.19 | EP{G. Eric Platford - Chief Quality Engineer}
JA passed | 14.12.19 | E
AH passed | 16.12.19 | WH
Passed | 18.12.19 | AH

[Stamped across center] C.9.1.1
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙