From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Query on whether a standardisation sheet is required for a steel forging for an exhaust cut-out.
| Identifier | ExFiles\Box 45\3\ Scan138 | |
| Date | 28th September 1920 | |
| R.N. 228b 50(T) (S.G.748. 24-8-20) G.{Mr Griffiths - Chief Accountant / Mr Gnapp} 2660 X 40/2 BY4-P28.9.20. HS.{Lord Ernest Hives - Chair} from BY.{R.W. Bailey - Chief Engineer} c. EFC. RECEIVED EXHAUST FITTINGS. FORGING FOR CUT-OUT. -------------------- So far no standardisation sheet has been issued to cover the use of the steel forging which is welded to the exhaust pipe to which the cut-out fits. We have got some steel forgings in for the above and would like to know whether a standardisation sheet is actually required, or whether we should put it through as an ordinary alteration. BY.{R.W. Bailey - Chief Engineer} | ||