From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Modifications to the rear end components for 'India 3 & 4' vehicles.
| Identifier | WestWitteringFiles\S\2April1928-June1928\ Scan108 | |
| Date | 22th May 1928 | |
| ~~BY~~ FROM DA.{Bernard Day - Chassis Design} C. to ~~BJ.~~ HS.{Lord Ernest Hives - Chair} ORIGINAL DA{Bernard Day - Chassis Design}3/M22.5.28. REAR END OF INDIA 3 & 4. X5600 X5460 / X5400 Herewith we send N. schs. 2575/6/7/8., shewing the frame rear end, 2nd. cross member a petrol tank, rear wheel carrier and luggage grid, and number plate. We have made every effort to permit of the maximum body space with the minimum turn under, in order to cater for modern fashions. We do not wish the removal of the filter to call for excessive turn under. PETROL TANK. We have modified the K.S. gauge because R.{Sir Henry Royce} says he understands that the vent is not now necessary. This modified fitting should be used on "SS{S. Smith}". It will be noticed that the vent fitting in the filler is shorter than that on "SS{S. Smith}", and should be used on both cars. No weir is needed in the vent come on the tank. WHEEL CARRIER & LUGGAGE GRID. These are the same in every respect as on "SS{S. Smith}" except for length and set in the cross tubes. TAIL LAMP. We want to use tail lamp S.220. as this can be used both here and on the continent. EXHAUST. We shew the swan neck and fishtail. We should be glad if Derby would set out the sheet metal support to the 2nd. cross member DA.{Bernard Day - Chassis Design} (The above drawings were posted to you on Monday night.) | ||