From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Parts changes for the governor control for shock dampers on the Phantom II chassis.
| Identifier | ExFiles\Box 16\5\ Scan064 | |
| Date | 10th December 1932 | |
| X7520 BY/HEB{H. Biraben}2/M.10.12.32. c. Ha/Rm.{William Robotham - Chief Engineer} RECEIVED DEC 10 1932 PHANTOM II. CHASSIS. GOVERNOR CONTROL FOR SHOCK DAMPERS SEC:7163. IN ACCORDANCE WITH "N" SCHEME 3593. DAMPER GOVERNOR RELEASE VALVE MODN: Further to memo' BY/HEB{H. Biraben}2/M.9.7.32. please receive herewith two Blue Prints of each of the following, together with an extra print of parts marked @,- F.84862 Release Valve. 1 off, replacing F.84624. @ F.84863 Stud for Drip Plug. 1 " " G.78415. @ F.84864 Single Drip Plug. 1 " " F.77862. F.84865 Oil Pipe(Main Casing to Release Valve) 1 off, replg: F.84639. F.84866 Plunger(Release Valve). 1 off, replacing F.84625. @ F.84867 Pin(Release Valve Plunger). 1 " ADDITIONAL. F.84868 Sliding Shaft(Release Valve). 1 " replacing F.84634. F.84869 Oil Pipe Stud(Main Casing). 1 " " F.84635. The following standard parts are also required.- F.79464 Washer(Drip Plug). 1 off, replacing F.73411. F.78494 " { " " }. 2 " " F.77242. E.55155 Nut { " " }. 2 " " F.81148. G.77187 Single Pipe Conn:(.250 Pipe). 3 " " F.77862. The following parts are not required.- F.84626 Spring Ring(Release Valve Outer Housing). 1 off. F.{Mr Friese} 6754 Inner Housing(Release Valve). 1 " F.79766 Disc(Oil Pipe Stud). 1 " Please note that F.84557 Release Valve Casing, has been altered by Altn: No:14001/F.{Mr Friese} and is now correct in accordance with the above Scheme. BY/HEB.{H. Biraben} | ||