Technical drawing of a ventilated disc wheel assembly.
| Identifier | ExFiles\Box 159\7\ scan0276 | |
| Date | 9th March 1939 | |
| PART No 105310 SHEET 1 FINISHED DIMENSIONS TO ONE DECIMAL PLACES .010 ALL DIMENSIONS ARE IN INCHES 105315 105316 MILL SECTION SECTION THRU' MILL SECTION SECTION THRU' RIVET HOLE TWICE FULL SIZE 12 RIVETS SPACED AS SHOWN RIVETS MUST BE FLUSH TO .03 ABOVE RIM BASE. RIVETS TO BE CROWNED .015 APPROX OUTER END MUST BE FREE FROM BURRS & SHARP EDGES. STAMP K.H., MONTH & YEAR MANFD. & PART No IN CONVENIENT POSITIONS ON THIS FACE. 15.570 DIA (BS {A J. Barnes - Assistant Manager} 346: OR TAPING DIA USING 5.10 DIA TAPE) 8.00 P.C.D. +/- .003 RESTRIKE TO PRODUCE FLAT SURFACE WITHIN .006 FOR THIS DISTANCE ALL ROUND. THICKNESS OF PAINT ON THIS SURFACE TO BE UNIFORM. 105314 12. RIVETS 104561 105312 101819 SECTION A-A SECTION B-B SECTION C-C WHEN MOUNTED ON FIXING BOLTS & BEARING FACE MAX. RADIAL RUNOUT MEASURED AT 'Y' NOT TO EXCEED .040 TOTAL INDICATOR READING & MAX. LATERAL RUNOUT MEASURED AT 'X' NOT TO EXCEED .05 TOTAL INDICATOR READING. FINISH:- MAROON PRIME NTR V 78 KELSEY-HAYES WHEEL CO. LTD. DAGENHAM DOCK, ESSEX. SCALE: FULL SIZE DATE: 9-3-39 PART NO. 105310 TITLE: 3.50 D x 16 VENTILATED DISC WHEEL ASSEMBLY CHANGES TABLE: 8-3-39: RELEASED DRN: DLI CH: JCR | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).