Blueprint sketch and notes for a standard geared industrial motor.
| Identifier | Morton\M6\ img020 | |
| Date | 25th March 1929 | |
| Copy of Sketch, from Mr Royce. STANDARD GEARED MOTOR Max torque type prefferred could be registered type perhaps makes a convenient & satisfactory belt drive. High speed & efficient motor to lower first cost with good power factor Small space & weight. This shows an industrial motor (3 phase) with reduction gear (or for crane work) The motor if small run 3000 & if larger @ 1500 (4 pole) The gear is internal & enclosed therefore silent & clean & lubricated & can be nitro-hardened (without distortion) but to suit the casing must be about 3 to 1 ratio [wonderfully good type of gearing] A belt pulley, pinion or coupling can be on the second motion shaft, & brake drum over casing. Copies to:- Mr Royce (West Wittering(Henry Royce's home town)) Claremont Holley Bentley (Original). | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).