From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Improvements and alterations to the 20HP steering geometry.
| Identifier | WestWitteringFiles\Q\April1927-June1927\ 52 | |
| Date | 30th April 1927 | |
| TO BY.{R.W. Bailey - Chief Engineer} FROM DA.{Bernard Day - Chassis Design} ORIGINAL DA{Bernard Day - Chassis Design}6/M30.4.27. C. to - SJ. HS.{Lord Ernest Hives - Chair} 20HP. STEERING GEOMETRY. X5430 X5450 We send herewith N. sch. 2401. shewing a layout of the side steering tube etc, which will give us a definite improvement in the geometry. There is no alteration to the steering column except the length of the pendulum lever. The side steering tube is set in the plan view, but is otherwise unaltered except for the slight difference in the position of the locking piece at the rear end. The spring position and fixings are unaltered except for the lubrication of the rear pin. The ball end on the side steering lever on the axle has been reduced inheight by using a tab washer and reducing the clearance between the nut and the axle. We should like to point out that this latter seems excessive on the Derby drawing - F.5182C - and may account for some of the poor geometry. DA.{Bernard Day - Chassis Design} | ||