From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Mechanical test procedure for a 20 HP governor, including performance limits.
| Identifier | ExFiles\Box 61b\2\ scan0068 | |
| Date | 7th July 1927 guessed | |
| B. MECHANICAL TEST OF 20 HP. GOVERNOR. (1) The distributor shall now be fitted up with its rotor and cover, and wired up to a standard 20 HP. ignition equipment. A disc marked in degrees is fitted to the driving end of the shaft and a spark gap and pointer arranged to shew the instantaneous position of the disc at every revolution, by the light of any one of the six sparks from the distributor, intensified by the use of a H.T. condenser in parallel with the spark gap. The remaining five sparks are allowed to discharge at any convenient gap. The distributor is run up to a high speed and then slowed down until the lowest speed at which the full governor advance as indicated by the disc is found. Then calling this reading 15º the advance-speed characteristic of the governor is found, working downwards. This should lie within the following limits :- Advance. Speed. Min. Max. 15º 1130 1300 12º 870 1040 9º 710 880 6º 550 720 3º 400 560 It is best to start the test with the hand advance fully retarded, taking care that it remains so, in order not to interfere with the governor readings. Contd. | ||