From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Recommendation to manufacture aluminium covers for rear brakes in one non-detachable piece.
| Identifier | ExFiles\Box 5\3\ 03-page044 | |
| Date | 18th October 1921 | |
| X4257 To R.{Sir Henry Royce} from Hs.{Lord Ernest Hives - Chair} c. to GJ. c. to E.{Mr Elliott - Chief Engineer} c. to Da.{Bernard Day - Chassis Design} c. to BY.{R.W. Bailey - Chief Engineer} c. to EP.{G. Eric Platford - Chief Quality Engineer} c. to Wor.{Arthur Wormald - General Works Manager} Hs{Lord Ernest Hives - Chair}2/LG18.10.21. GOSHAWK 11. X.4219. X.4257 ALUMINIUM COVERS FOR REAR BRAKES. We recommend that the aluminium covers for the rear brakes should be made in one piece and are not detachable. We do not know of any advantage in attempting to make these aluminium covers easily detachable. If it is necessary to adjust the brakes or they have to be inspected, it is always necessary to remove the brake drum. This is a much easier operation than undoing all the fiddling 2.BA bolts. On Goshawk 11. it is impossible to remove these covers because a number of the bolts come at the back of the road spring also another trouble with them is that the bolts which fix the loose pieces which join the two halves together, have no means of preventing them turning round. We strongly recommend that the aluminium covers should be in one piece and should be looked upon as permanent part of the brake bracket. Hs.{Lord Ernest Hives - Chair} | ||