From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Design and sourcing of special Enots nipples for axle lubrication.
| Identifier | ExFiles\Box 12\1\ 01-page135 | |
| Date | 25th May 1929 | |
| X7420 HE/GY. from DA.{Bernard Day - Chassis Design} DA{Bernard Day - Chassis Design}2/M25.5.29. DESIGN OF ENOTS NIPPLE FOR AXLE LUBRICATION. X3806 X7420 X4400 X7350 Replying to Hs{Lord Ernest Hives - Chair}/GY/LG22.5.29, we understand that you have actually got special Enots nipples with non-return valve, and are getting nipples for the rear axle supply, which have in addition a filter similar to the front axle. If this is so we should be much obliged if you could send us either drawings or samples of these nipples. Hy{Tom Haldenby - Plant Engineer}'s dept. have asked us to send them a design for the non-return valve and rear axle filter, but if these parts are to be made outside by Messrs. Benton & Stone we think it would be better to use their actual pieces, provided they appear to be satisfactory. The dimensions of the filter to the back axle will have to be closely watched as the nipple comes very near to the battery cross member and heelboard as it is. DA.{Bernard Day - Chassis Design} | ||