From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Insulation and separation between the dash and scuttle on the 20.HP chassis.
| Identifier | WestWitteringFiles\K\September1923\ Scan119 | |
| Date | 21th September 1923 | |
| TO BY.{R.W. Bailey - Chief Engineer} FROM DA{Bernard Day - Chassis Design}/EV.{Ivan Evernden - coachwork} c. to LHS.{Lord Herbert Scott} c. to HS.{Lord Ernest Hives - Chair} DA{Bernard Day - Chassis Design}/EV{Ivan Evernden - coachwork}1/M21.9.23. RE. 20.HP. - INSULATION BETWEEN DASH & SCUTTLE. X4613 We are quite in agreement with your remarks in memo. BY5/P19923. re the separation of the scut-tle from the dash on the 20.HP. chassis. We have got a body at Bromley treated in this manner and hope shortly to be able to give a definite opinion on the matter. We have tested it already by pulling forwards at the radiator cap, endeavouring to pull the dashboard forward, and have come to the conclusion that it is possible but a slight stiffening of the dashboard would be required and this could be accomplished most probably by utilising a modified design of bonnet angle round the dash which would have a certain stiffness. We will write to you again on this matter. DA{Bernard Day - Chassis Design}/EV.{Ivan Evernden - coachwork} | ||