From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Letter from Howard Graham Ltd. suggesting different bush sizes and assembly options for a rear spring anchor.
| Identifier | ExFiles\Box 154a\2\ scan0210 | |
| Date | 10th August 1939 guessed | |
| CONTINUATION -2- HOWARD GRAHAM. LTD. Rolls-Royce Ltd. Another suggestion for the same application is shown on our drawing B/183, but here again our drawing has been prepared for a different size of Bush. For the anchor end of the rear spring, we suggest that you use Bush No. CW.917 as shown on our print A/171, and our prints numbers A/150 and A/155 give three suggestions as to possible ways of assembly. Should you, under the present circumstances, be concentrating on other problems than the ones mentioned above, we shall be pleased to co-operate with you, and work out new applications at your request. Yours faithfully, HOWARD GRAHAM LTD. H Henry. Technical Department. | ||