From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Cause of squeaks from a spring load shoe and proposing a testing solution before final fitting.
| Identifier | ExFiles\Box 12\5\ 05-page196 | |
| Date | 27th June 1930 | |
| -2- to bind on either limit of the guide. If these centres on the carrier plate are too close a similar operation takes place to the spring load shoe. I consider this jig is largely responsible for the variation in the complaint of squeaks from production. I had to file the hole in the carrier plate on 19-EX. to get the centres correct. It is suggested that each shoe should be tested with a push spring balanced before the drum is finally fitted. I.A. Leslie. 27.6.30. | ||