From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Use of central rolled eyes in special road springs, referencing a successful test and cost comparison.
| Identifier | ExFiles\Box 17\1\ Scan070 | |
| Date | 16th October 1931 | |
| DA.{Bernard Day - Chassis Design} c. HS.{Lord Ernest Hives - Chair} c. BY/HEB.{H. Biraben} Y7410 BY.6/G.16.10.31. Y5410 ROAD SPRINGS ------------ Referring to DA.{Bernard Day - Chassis Design}1/M.15.10.31. and further to our BY.1/G.12.10.31. we should have emphasized the fact that in the special springs produced for us by Firths we use central rolled eyes all round. We can, of course, produce the offset rolled eye if this is more convenient for you at one end of the spring. Since writing the above note, we notice from Mr. Hancock's report of the completed 10,000 miles test that the special springs with rolled eyes produced for us by Firths have run 5,000 miles and that from an examination of the springs in question Mr. Hancock is satisfied with the condition of them. No trouble has been experienced with the eyes or the lubrication of the plates. The cost of a central rolled eye is only 10% of that of a solid forged eye. BY.{R.W. Bailey - Chief Engineer} | ||