Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Modifications to the front anchorage of rear springs.

Identifier  ExFiles\Box 16\7\  Scan005
Date  14th April 1926
  
X.7410

To BY.{R.W. Bailey - Chief Engineer} from DA{Bernard Day - Chassis Design}

DAL/M14.4.26.

EAC. 7 - FRONT ANCHORAGE OF REAR SPRINGS etc.

Herewith we send N.sch.2175 on which we have carried out the modifications instructed in R2/M2.3.26.

This is the type of front anchorage and gusset which R.{Sir Henry Royce} has chosen of the alternative submitted. We have reduced the number of bolts in each gusset from 6 to 4 and have modified the shackle covers. This latter point we are not quite sure about but we think the covers can be added at any time, and that it should not prevent your detailing the bracket.forging.

We have retained the idler levers because as shewn in the diagram in the lower part of the drawing we think it will be necessary to prevent the brake ropes rubbing against the gussets.

DA.{Bernard Day - Chassis Design}
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙