Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Scheme to fix an oil leak on the Wraith III steering column by stiffening the flange on the bottom support bracket.

Identifier  ExFiles\Box 9\7\  07-page085
Date  30th September 1937
  
F.{Mr Friese} Dept.
G.{Mr Griffiths - Chief Accountant / Mr Gnapp} Dept.
E.{Mr Elliott - Chief Engineer} Dept.
D.{John DeLooze - Company Secretary} Dept.
C. Rm.{William Robotham - Chief Engineer}
A.D.O./L.W.
650
DA.{Bernard Day - Chassis Design}7/G.SO.30.9.37.

STEERING COLUMN - WRAITH III.

Herewith the following scheme :-

F.CD.94 Stiffened Flange on Bottom Support Bracket.

There is complaint of an oil leak at the junction of the bottom support bracket FW.908 and the adjusting sleeve (see Rm{William Robotham - Chief Engineer}/J.H.6/AP.10.9.37) due to the flange not being sufficiently rigid. The attached scheme shows the flange and bosses thickened to overcome this complaint.

DA.{Bernard Day - Chassis Design}
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙