From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Production and fitting of new servo drive components for the Bentley V Chassis.
| Identifier | ExFiles\Box 83\3\ scan0161 | |
| Date | 21th March 1941 | |
| Handwritten: Rigby Handwritten: Do you want these for 200 customers cars? Rm{William Robotham - Chief Engineer} To Rm.{William Robotham - Chief Engineer} from Rm{William Robotham - Chief Engineer}/HH. c. to Rm{William Robotham - Chief Engineer}/MHR.{M. H. Rigby} Bentley V Chassis. Servo Drive - Sec. 6045. Please receive herewith blueprints of each of the following :- Rm.{William Robotham - Chief Engineer}691 Sealing Washer. 1 Off. Rm.{William Robotham - Chief Engineer}692 Outer Excluder. 1 " Rm.{William Robotham - Chief Engineer}693 Excluder. 1 " The above pieces have been produced to suit the first twelve chassis in A series, and it is intended to fit them to these cars. The material of the Sealing Washer (Ferodo S.561) is a number designated by Messrs. Ferodo, Ltd., to the composite Ferobestos and VG.100 used previously for this job. The above replace the old parts as follows :- Rm.{William Robotham - Chief Engineer}691 replaces GB.4863 Rm.{William Robotham - Chief Engineer}692 New Piece. Rm.{William Robotham - Chief Engineer}693 " " This completes D.O. instructions for the above. Kindly produce and fit. Rm{William Robotham - Chief Engineer}/HH. | ||