From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
The parts for a heat shield to be fitted to the exhaust manifold on a 40/50HP chassis.
| Identifier | ExFiles\Box 14\6\ Scan185 | |
| Date | 24th December 1930 | |
| To C.S. Registr. Dept. c. Mr. Bowers. c. HS{Lord Ernest Hives - Chair}/GWH.{George W. Hancock - Head Chateauroux} N7230 BY/CS2/IG.24.12.30. Re 40/50HP Chassis - Exhaust Fittings - Sec:5230. Heat Shield for fitting to existing Exhaust Manifold-Sch:1383. Please receive herewith the following new details to be instructed for the above:- E.81968 Clip 1 off. E.81969 " 1 " E.81970 Shield Plate 1 " E.81971 " 1 " E.81972 Lagging 1 " Together with the following stock parts:- K.203 Bolt 2 off. K.204 " 2 " K.4407 Washer 2 " K.9008 F.S.Washer 4 " K.4310 Nut 4 " The above parts have been produced for protecting the ignition wires against the heat from the Exhaust Manifold. Will Repair Dept. please instruct the above parts as required, both for their own requirements and for Cricklewood. Please receive herewith drawings E.81968/9/70/1/2 and Sch:1383 for issue to all depts. concerned. BY/CS. Roy.{Sir Henry Royce} [STAMP: RECEIVED 24 DEC 1930] | ||