Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Rear axle control weight reduction and the performance of thin leaf cantilever springs on the 40/50 model.

Identifier  ExFiles\Box 71\2\  scan0196
Date  11th November 1927 guessed
  
contd :-

-2-

rear axle control will be 30.5 lbs. lighter than the present standard 40/50.

We consider that the spring makers are not making the best use of the metal at their disposal as demonstrated by the American front springs and the present example. We are taking up the question of spring weights with them.

We do not know of a single case of rear spring failure on the 40/50 since the introduction of the thin leaf cantilever, and we must therefore be well within the safe maximum stress and stress range on these items.

HS{Lord Ernest Hives - Chair}/Rm.{William Robotham - Chief Engineer}
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙