From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Requesting modification to the shock damper mounting due to a new valve design.
| Identifier | ExFiles\Box 55\3\ Scan070 | |
| Date | 27th February 1926 | |
| To BY. {R.W. Bailey - Chief Engineer} Hs. {Lord Ernest Hives - Chair} } FROM DA. {Bernard Day - Chassis Design} X235 DA {Bernard Day - Chassis Design} 3/M27.2.26. RE. RR. HSOCK DAMPERS. X. 235 X. 8520 Regarding N.sch.2145, we wish to point out that the new type of valve makes the rear bolt holding the shock damper body on to the frame difficult to get in. We should be glad if you would increase the centre from the rocker shafr to 4", and turn the bolt round so that the nut is to the outside. DA. {Bernard Day - Chassis Design} | ||