Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Blueprints for the Rippletto Chassis frame and associated components.

Identifier  ExFiles\Box 118\1\  scan0206
Date  11th April 1940
  
To Rm{William Robotham - Chief Engineer}

Rm{William Robotham - Chief Engineer}/HH2 /11.4.40.

Rippletto Chassis.

Frame and Fittings Sec 7000

2nd Crossmember to EL 119.

Please receive herewith 3 blueprints of each of the following:-

RF 753 Frame Stiffening Gusset-Rear-RH{R. Hollingworth}- 1 off
RF 754 " " "-LH{Mr Haworth}- 1 off
RF 755 End Crossmember- 1 off
RF 756 Support Bracket for Filter- 1 off

These parts go to make up the frame as supplied by the frame makers, and complete the major details. When they have been produced, the frame can be built up.

We have in hand a drawing of the frame in its assembled condition, and this will be issued in the course of a few days.

Also attached are 2 blueprints of PL 119, LOP and scheme.

With reference to RF 756 Filter Support Bracket, it is not intended that this should be produced at present.

Rm{William Robotham - Chief Engineer}/HH.
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙