From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Specification sheet detailing parts and procedures for front/rear suspension, axle, and hub components.
| Identifier | ExFiles\Box 118\1\ scan0031 | |
| Date | 12th January 1940 | |
| - 4 - HPS{Horace Percy Smith - Experimental Factory Mgr}/RH.{R. Hollingworth}1/BA.12.1.40. Front Shock Dampers LOP.FB.4728. Complete to the above LOP. Using Ex.S.1530 Damper Casings in A/C. 3 bolt fixing. FB.4333/4 Triangle Levers to FCD.1005. ------------------ Pressure Piping. Mock-up as previous. ------------------ Front Stabiliser. LOP.FB.3999. Complete to the above LOP. ------------------ Rear Axle LOP.GB.4686. Semi Floating. .650 Hypoid 11 x 41 Ratio Gears S/ZN. 1 3/8 Shafts. Complete to the above LOP ex S AW. Chassis. GCD.1437 Modified Hub Bearing. GB.5221/2 Mod. to Axle Shaft - mod existing. 2 - GB.5223 Collar. 2 - GB.5224 Dist.Piece. 2 - GB.5225 Pack Ring. 2 - GB.5226 Washer. 2 - GB.5227 Washer. 2 - N.3474 Hoff.Bearings. also fit :- GB.4892 Belleville Washers. ------------------ Rear Hub LOP.GB.4796 Complete to the above LOP. Fit :- Ex.S.1755 Brake Drum. GB.3691 End Plate, if available in time. | ||