From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
List detailing the specifications for a series of experimental cars, designated EAC.1 to EAC.7.
| Identifier | ExFiles\Box 57\1\ Scan233 | |
| Date | 5th March 1926 | |
| To E.{Mr Elliott - Chief Engineer} AJS. ) BY.{R.W. Bailey - Chief Engineer} HS.{Lord Ernest Hives - Chair} ) FROM DA{Bernard Day - Chassis Design}/EV.{Ivan Evernden - coachwork} 45770 DA{Bernard Day - Chassis Design}/EVL/M5.3.26. X.8770 X.4219 X.8830 X.7770 X.5770 X.8830 X.180 LIST OF EXPERIMENTAL CARS. EAC.1: Originally the new 40/50 car. Phantom engine, 3-speed box, gusseted frame - 29" at front. Half elliptic rear springs, 48" front springs. New back axle. Engine and gearbox separate units. Layout - see N.sch.1374. This car was previously called the Seagull and then the Export chassis. Only one has been built by Hs.{Lord Ernest Hives - Chair}; and that not to above specification, but has :- Phantom engine and gearbox with EAC.1. propeller shaft, back axle and frame. EAC.1. has been replaced by EAC.7. EAC.2: This was our idea of a new engine in the 40/50, but it had many chassis changes so was cancelled by Sales. Specification - Phantom engine, 40/50 gearbox for subframe, standard torque tube axle, revised seating and steering positions. Frame extension at the rear to carry luggage grid. Layout - see N.sch.1457. One of these cars was built up practically to the above specification. EAC.3: This is the Silver Ghost with F.W.B. EAC.4: This chassis was an EAC.2. having the engine, gearbox and clutch as a unit. Layout - see N.sch: 1750. Most of the design was completed but nothing made. EAC.5: This is an EAC.7. but it has a unit engine, gearbox and clutch. No layout made as yet. EAC.6: This was what we eventually agreed to sell in the place of EAC.2. It consists of a Silver Ghost chassis with a New PhantomCodename for PHANTOM I engine, radiator with shutters. Sold as New PhantomCodename for PHANTOM I 'V' series. Layout - see Production drawing. EAC.7: As stated above this is a revised version of EAC.1. Frame 1" lower than standard. Phantom revised engine and revised gearbox 40/50. Half elliptic rear springs and EAC.1. axle. Revised seating and shortened bonnet with cast dash. Open prop. shaft with Mechanic's joints. Layout in hand - see N.sch:2090. contd :- | ||