From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Specification updates for the Peregrine II Bumper Chassis.
Identifier | ExFiles\Box 169\4\ img008 | |
Date | 22th December 1932 | |
To Hs.{Lord Ernest Hives - Chair} from RHC{R. H. Coverley - Production Engineer}/WSC.{W. S. Cassel} Crankcase C.... Hs{Lord Ernest Hives - Chair}/100. PEREGRINE II. - BUMPER CHASSIS. With reference to specification RHC{R. H. Coverley - Production Engineer}/WSC{W. S. Cassel}1/LS.20.12.32 the following is incorporated.- PASSED TO TEST 14.12.32. Frames & Fittings LOP.F.100267. 4th, Crossmember to suit Transmission Shaft to N.S.3532/30. F.100552 4th, Crossmember. F.100550/1 End Sockets. Front Engine Mounting to Hs.{Lord Ernest Hives - Chair}740. Ex.9707 Front Crossmember. Ex.9697/8 Radiator Support Brackets. Front Road Springs. Woodhead Front Road Springs. O.S. N.S. Piece No. F.100095 F.100095 Type. 600 lbs. 600 lbs. Loaded lbs. 610 lbs. 615 lbs. Loaded Camber .370 .370. Initial Camber (after test) 3.678 3.638 Springs fitted with Wefco Gaiters. Front Axle. New Axle G.100763 to suit Anchorage for Axle Control Damper. Pedals LOP.F.100609 N.S.3537-3541. New complete to the above LOP. & Schemes. Improved Clutch Operation - replaces Pedals to LOP.F.100276 - LeC.3195. RHC{R. H. Coverley - Production Engineer}/WSC.{W. S. Cassel} | ||