Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Parts and blueprints for the Wraith front engine mounting and damper fixings.

Identifier  ExFiles\Box 8\7\  07-page44
Date  30th September 1937
  
BY/NS.{Norman Scott}3/G.30.9.37.

622

WRAITH - FRONT ENGINE MOUNTING.

Please receive herewith two blueprints of:-

S.CD.22 Fixing for 25/30 Dampers, to Wraith. (Issue 2).

We also send :-

Issue 2.
Ex.S.16 } Bracket Front Engine Mounting. R.H. 1 off.
Ex.S.17 } Upper. L.H. 1 off.

Ex.S.118 } Bracket Front Engine Mounting. L.H. 1 off.
Ex.S.119 } Lower. R.H. 1 off.

Ex.S.120 Distance Piece. 2 off.
Ex.S.121 Washer 6 off.

S.CD.22 (Issue 2) supersedes S.CD.22 (Issue 1) - see memo BY/NS.{Norman Scott}1/G.23.8.37.

These pieces are required to suit the re-arrangement of Damper Rubbers shewn on S.CD.22 (Issue 2). This modification has been made at the request of Rm{William Robotham - Chief Engineer}/Wmn.

The following parts will also be required :-

K.4211 Nut 2 off.
K.4608 Split Pin. 2 off.
K.105 Bolt 6 off.
K.4006 Nut 6 off.
K.9006 Washer 6 off.
F.60862 Washer 2 off.

Will you kindly instruct two sets of these pieces.

BY/NS.{Norman Scott}

Note: 1 set of these prints has been handed to Rm{William Robotham - Chief Engineer}/Wmn.
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙