Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Specification sheet detailing components for front axle, horn, fan, and exhaust systems.

Identifier  ExFiles\Box 169\4\  img068
Date  7th November 1932
  
-5- RHC{R. H. Coverley - Production Engineer}/WSC{W. S. Cassel}3/AP.7.11.32

Front Axle Control Dampers LOP F.100622

J.111. Type - Complete to the above LOP.
F.59295/6 Main Casings - A/C.
F.59293 Pistons - Mod. to Hs.{Lord Ernest Hives - Chair} 741.
Addition of Air Vent Groove.
F.100668/9 Main Levers to suit 4 1/2° lean of pivots.
Load Set: H.P. 90 lbs.
L.P. 90 lbs.

Anchorage for Front Axle Control Damper LOP. F.100491.
RR. Scheme 246

Complete to the above LOP & Scheme to suit.
J.111. Type of Axle Control Damper.
F.100615/6 Anchor Brackets.
F.100617/8 Coiled Pipes.

Horn & Fittings LOP. P. 84405.

2 - Lucas H.F. 725. Horns fitted on Front Wing
Stays - 1 each side of Chassis.

Fan LOP E.100236. - RR. Scheme 150

Complete to the above LOP and Scheme.

Exhaust Fittings.

Complete exhaust system as shown on
Arrgt Ex. 9756.
E.100625 Manifold.
E.100623 Downtake Pipe 1.875 dia.
E.100433 Expansion Box - Adjustable Baffle Tubes.
E.100655 Rear Silencer Assembly fitted to Hs{Lord Ernest Hives - Chair} 730
less Pull Rods on Baffles.
E.100658. Swan neck 1.750 dia.
Intermediate Pipe 1.875 dia.

-continued-
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙