Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Parts list and instructions for fitting a Clayton Interior Heater to a 20/25 HP chassis.

Identifier  ExFiles\Box 137\1\  scan0149
Date  5th November 1932
  
To RHE: [Strikethrough]
c. Hs{Lord Ernest Hives - Chair}/Rm.{William Robotham - Chief Engineer}
X4300
BY/CS2/EH.5.11.32.

Re 20/25 HP. Chassis suitable for fitting Clayton Interior Heater.

Water Pump-Section 5160.

Please receive herewith blue prints of the following drawing detailed to R.R.Scheme 272.

E.59080 Water Pump End Cover.

Will you please instruct one of the above, together with the following parts.

E.83574 Adaptor - Water Outlet Tap 1 off.
E.75427 Washer - Cylinder Block 1 "
U.657 Tap 2 "
U.658 Sleeve - Spring 4 "
U.737 Tap Body 2 "
E.21572 Spring 2 "
T.1404 Union Nut 2 "
E.3895 Union Nipple 2 "
G.78904 Washer 2 "
K.4009 Nut - Tap 2 "
K.4602 Split Pin 2 "

Remainder of parts to LOP.E.56597.

The above is in accordance with memos' Hn{F. C. Honeyman - Retail orders}25/1/20.10.32, and Hs{Lord Ernest Hives - Chair}/Rn{Mr Robinson}4/KT.28.10.32, i.e. connections etc. for fitting Clayton Interior Heater.

R.R.Scheme 272 Connections on Engine for Clayton Interior Heater.

LID{A. J. Lidsey}

BY/CS.
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙